Flatten 3D to 2D in AutoCAD

Flatten 3D to 2D in AutoCAD

Have you ever wondered how to flatten AutoCAD drawings?

Even though you may be working in 2D, AutoCAD is a 3D application with an X, Y and Z axis. Sometimes you may unwittingly place something with a Z value (Height) and from a 2D top down view your drawing may look fine but it isn’t.

Even though AutoCAD LT supports 3D, you can’t work in 3D in AutoCAD LT but objects can still have a Z value, especially if you have been sent a drawing created in full AutoCAD.

AutoCAD Drawing with Z Axis Value

Figure 1: Front view of seemingly 2D drawing

So how can I check if I have anything with a Z value?

You have two options to check if you have anything that has a Z value:

  1. In full AutoCAD you can eyeball it. Using the view Cube select the front view, if you see anything above the rest of your drawing, you have placed something on the Z axis.
  2. Using the Quick Filter search for anything that has a Z axis value greater than 0. You may need to search both Start Z and End Z from the properties list.
AutoCAD Quick Select Filter

I have 3D objects so how do I fatten my drawing back to 2D?

OK, so you have objects in your drawing which have a Z value. You want to make your drawing flat again with one simple command? Easy…

Making sure you’re in your top down view and select everything in your drawing (Ctrl+A).

Flatten AutoCAD Drawing Step 1

With everything selected use the command “FLATTEN”.

This will Flatten your drawing removing any Z axis values.

Flatten AutoCAD Drawing To Remove Z Values

Conclusion

FLATTEN is a very useful command and is quick to use. Even if you don’t think you have any 3D objects, quickly selecting everything in the drawing and using the command Flatten is a good thing to do.

Its is also useful to use the OVERKILL command after FLATTEN to remove any duplicate lines that now exist in the same space.

For more information on this blog post, or if you have any other questions/requirements, please complete the below form: